Solved FEA Pack 20 (Cases 191-200)

Get these FEA files to see the settings we used for materials, mesh, contacts, loads, time steps, solver etc. On this page you find only MECHDAT or WBPZ files and 3D models, while the PDF tutorials are found on the TUTORIALS and SHORT TUTORIALS pages!

ANSYS WB 19.1 OR HIGHER

191. 1st in the World!!! Transient Structural ANSYS WB FEA - Friction Stir Welding (FSW) process

Click for video with results on

Not for beginners, it contains some APDL commands! If you have ANSYS WB 19.1 or higher, get the ANSYS Workbench fully solved 2.8 GB simulation, the MECHDAT file + the 3D model for only $19

ANSYS WB 19.1 OR HIGHER

192. 1st in the World!!! ANSYS WB Explicit Dynamics - Roller coaster with initial speed under self weight

Click for video with results on

If you have ANSYS WB 19.1 or higher, get the ANSYS Workbench data as MECHDAT file + the 3D model for only $17

ANSYS WB 17.1 OR HIGHER

193. STATIC STRUCTURAL ANSYS WB - FEA OF U SHAPE BENDING OF A COPPER WIRE

Click for video with results on

If you have ANSYS WB 17.1 or higher, get the ANSYS Workbench data as MECHDAT file + the 3D model for only $16

ANSYS WB 2019 R2 OR HIGHER

194. ANSYS WB Static Structural FEA - SMART (XFEM like) simulation of 2 cracks in a hook/ anchor

Click for video with results on

If you have ANSYS WB 2019 R2 or higher, get the ANSYS Workbench data as MECHDAT file + the 3D model for only $17

ANSYS WB 19.1 OR HIGHER

195. 1st in the World!!! ANSYS WB Explicit Dynamics - Biomechanics simulation of leg kick in the chest

Click for video with results on

If you have ANSYS WB 19.1 or higher, get the ANSYS Workbench data as MECHDAT file + the 3D model for only $17

ANSYS WB 19.1 OR HIGHER

196. 1st in the World!!! ANSYS WB Explicit Dynamics - Shearing and shaving of AL in one step

Click for video with results on

If you have ANSYS WB 19.1 or higher, get the ANSYS Workbench data as MECHDAT file + the 3D model for only $16

ANSYS WB 19.1 OR HIGHER

197. 1st in the World!!! ANSYS WB Static Structural - Riveting a pop rivet to hold 2 plates

Click for video with results on

If you have ANSYS WB 19.1 or higher, get the ANSYS Workbench data as MECHDAT file + the 3D model for only $16

ANSYS WB 17.1 OR HIGHER

198. 1st in the World!!! ANSYS WB Explicit Dynamics with fluids - Water overflow upon piston insertion

Click for video with results on

If you have ANSYS WB 17.1 or higher, get the ANSYS Workbench data as MECHDAT file + the 3D model for only $16

ANSYS WB 17.1 OR HIGHER

199. ANSYS Workbench Steady State Thermal - Simulation of an electric motor

Click for video with results on

If you have ANSYS WB 17.1 or higher, get the ANSYS Workbench data as MECHDAT file + the 3D model for only $16

ANSYS WB 17.1 OR HIGHER

200. 1st in the World!!! ANSYS WB Static Structural - Cold extrusion of a copper rod with plasticity

Click for video with results on

If you have ANSYS WB 17.1 or higher, get the ANSYS Workbench data as MECHDAT file + the 3D model for only $16

☆ The MECHDAT files give you hints for your FEA work or training, by observing our set-up: geometry, materials, mesh, boundary conditions, analysis settings and solution items as seen in their YouTube clips. Solving is not guaranteed 100%, because ANSYS continuously changes the solving algorithms; usually they do a good job, sometimes...

☆ After you made the purchase, open the MECHDAT file and re-solve the FEA as follows:

⇒ for Static and Transient Structural: right click Solution, Clear Generated Data, Solve;

⇒ for Explicit Dynamics: right click Solution, Clear Generated Data, then go to Analysis Settings, Step Controls, Resume From Cycle = 0, Solve.

☆ BE SURE TO HAVE THE SAME OR EVEN A NEWER ANSYS VERSION, BECAUSE OLDER VERSIONS WILL NOT OPEN THE NEWER FILES!